Shoal & Stem

Austin, TX tap water

Supplied by City of Austin Water & Wastewater. Here's what its water means for your fish.

Disinfectant

Chloramine

0.1–3.1 ppm

Typical 2.3 ppm at the tap

At tap levels, chlorine and chloramine are toxic to fish, shrimp and the bacteria in a filter. Water conditioners are made for this range.

Your water is treated with chloramine. Unlike chlorine, it doesn't gas off when water sits out, and many pitcher and fridge filters aren't rated to remove it. Conditioners that list chloramine on the label break it apart, which frees about 0.56 ppm of ammonia here. Some utilities switch to plain chlorine for a few weeks a year.

Published by your utility: City of Austin Water & Wastewater's 2025 water quality report.

Safety for fish and shrimp

Ammonia (with conditioner)

Estimate

0.01–0.75 ppm (Worth knowing)

Typical 0.56 ppm

This is what a conditioner frees when it breaks the chloramine apart. A cycled filter clears it within a day; a big water change in a new or very small tank adds more of it at once. Some conditioners also bind ammonia for a day or so.

Nitrite (NO₂)

Not detected (Low)

Not detected in testing, so any nitrite in your tank comes from the tank itself.

Nitrate (NO₃)

Up to 0.5 ppm (Low)

Typical 0.2 ppm

Low, so water changes lower your tank's nitrate well.

Ammonia (with conditioner): Estimated from the chloramine level City of Austin Water & Wastewater reports (2025).

Nitrite: From EPA monitoring data (2013–2015).

Nitrate: Published by your utility: City of Austin Water & Wastewater's 2025 water quality report.

Water chemistry

General hardness

70–126 ppm

Typical 93 ppm

Moderately soft to medium. Suits most community fish and plants.

Carbonate hardness (alkalinity)

57–70 ppm

Typical 60 ppm

Moderate buffering. pH should stay fairly steady.

pH

9.2–9.3

Typical 9.3

Alkaline. Many utilities raise pH to protect pipes. Stability matters more than the exact number.

GH: Published by your utility: City of Austin Water & Wastewater's 2025 water quality report.

KH: From EPA monitoring data (2012–2019).

pH: From EPA monitoring data (2012).

  • City of Austin Water & Wastewater adds phosphate to protect pipes. It can feed algae in tanks without much plant growth.

Who supplies Austin, TX

Our data comes from public records and is still incomplete. Many utilities don't publish every number, so we're adding more all the time. Your city's range is a starting point: testing your own tap is the only way to know exactly what's in it.

Tap water lookup covers US cities only for now. Want to know why it matters? Read our story on tap water.

Compiled by Shoal & Stem from public records. Free to cite with a link.

Also supplied by City of Austin Water & Wastewater

More Texas cities

Look up another city