West Haven-Sylvan, OR tap water
Supplied mostly by Tualatin Valley Water District, plus 1 other utility. Here's what the water means for your fish.
Disinfectant
Chloramine
0.5–2.8 ppm
Typical 1.6 ppm at the tap
At tap levels, chlorine and chloramine are toxic to fish, shrimp and the bacteria in a filter. Water conditioners are made for this range.
Your water is treated with chloramine. Unlike chlorine, it doesn't gas off when water sits out, and many pitcher and fridge filters aren't rated to remove it. Conditioners that list chloramine on the label break it apart, which frees about 0.4 ppm of ammonia here. Some utilities switch to plain chlorine for a few weeks a year.
Published by your utility: Portland Water Bureau's 2025 water quality report.
Safety for fish and shrimp
Ammonia (with conditioner)
Estimate0.12–0.68 ppm (Low)
Typical 0.4 ppm
This is what a conditioner frees when it breaks the chloramine apart. A cycled filter clears it within a day.
Nitrite (NO₂)
Not detected (Low)
Not detected in testing, so any nitrite in your tank comes from the tank itself.
Nitrate (NO₃)
Up to 2 ppm (Low)
Typical 2 ppm
Low, so water changes lower your tank's nitrate well.
Copper at home taps (first draw)
0.01–0.5 ppm (Worth knowing)
The 90th percentile of first-draw samples from homes: water that sat in household pipes for at least six hours.
Shrimp and snails are sensitive to copper. Water that sits in household pipes picks up the most; it drops once the tap has run for a minute.
Ammonia (with conditioner): Estimated from the chloramine level Portland Water Bureau reports (2025).
Nitrite: From EPA monitoring data (2012–2019).
Nitrate: From EPA monitoring data; Portland Water Bureau's 2025 water quality report (2012–2025).
Copper (first draw): Published by your utility: Portland Water Bureau's 2025 water quality report.
Water chemistry
General hardness
Supplier's figure7–80 ppm
Typical 9 ppm
Soft. Good for tetras, rasboras and most shrimp. Livebearers, snails and African cichlids prefer harder water.
Carbonate hardness (alkalinity)
Supplier's figure22–33 ppm
Typical 26 ppm
Little buffering. pH can drop quickly between water changes, especially with CO₂ or an older tank.
pH
Supplier's figure8–9
Typical 8.5
Alkaline. Many utilities raise pH to protect pipes. Stability matters more than the exact number.
GH and pH: From the utility that supplies yours: Portland Water Bureau, which supplies Tualatin Valley Water District; Portland Water Bureau's 2025 water quality report.
KH: From the utility that supplies yours: Portland Water Bureau and Joint Water Commission, which supplies Tualatin Valley Water District; Portland Water Bureau's website (2014–2019).
Who supplies West Haven-Sylvan, OR
Tualatin Valley Water District
Serves all residents · Buys water from Portland Water Bureau
- 2025 water quality report
Portland Water Bureau
Serves 8% of residents · Lake or river water
Our data comes from public records and is still incomplete. Many utilities don't publish every number, so we're adding more all the time. Your city's range is a starting point: testing your own tap is the only way to know exactly what's in it.
Tap water lookup covers US cities only for now. Want to know why it matters? Read our story on tap water.
Compiled by Shoal & Stem from public records. Free to cite with a link.