Shoal & Stem
Tap water lookup

San Angelo, TX tap water

Supplied by City of San Angelo. Here's what its water means for your fish.

Disinfectant

Chloramine

Your water is treated with chloramine. Unlike chlorine, it doesn't gas off when water sits out, and many pitcher and fridge filters aren't rated to remove it. Conditioners that list chloramine on the label break it apart, which frees about 0.73 ppm of ammonia here. Some utilities switch to plain chlorine for a few weeks a year.

Safety for fish and shrimp

Ammonia (with conditioner)

Estimate

0.12–1.41 ppm (Worth knowing)

Typical 0.73 ppm

This is what a conditioner frees when it breaks the chloramine apart. A cycled filter clears it within a day; a big water change in a new or very small tank adds more of it at once. Some conditioners also bind ammonia for a day or so.

Estimated from the chloramine level City of San Angelo reports (2024).

Nitrite (NO₂)

Not detected (Low)

Not detected in testing, so any nitrite in your tank comes from the tank itself.

From EPA monitoring data (2013–2014).

Nitrate (NO₃)

1.9 ppm (Low)

Low, so water changes lower your tank's nitrate well.

Published by your utility: City of San Angelo's 2024 water quality report.

Copper at home taps (first draw)

0.13 ppm (Worth knowing)

The 90th percentile of first-draw samples from homes: water that sat in household pipes for at least six hours.

Shrimp and snails are sensitive to copper. Water that sits in household pipes picks up the most; it drops once the tap has run for a minute.

Published by your utility: City of San Angelo's 2024 water quality report.

Chlorine or chloramine at the tap

0.5–5.8 ppm

Typical 3 ppm

At tap levels, chlorine and chloramine are toxic to fish, shrimp and the bacteria in a filter. Water conditioners are made for this range.

Published by your utility: City of San Angelo's 2024 water quality report.

Water chemistry

General hardness

Not published yet

We haven't found this number yet. A drop test kit gives you your exact reading.

Carbonate hardness (alkalinity)

129–155 ppm

Typical 152 ppm

Strong buffering. pH stays steady and hard to lower without RO water.

From EPA monitoring data (2012–2019).

pH

7.6–8

Typical 7.9

Most community fish do well here. Stable water matters more than the exact number.

From EPA monitoring data (2012–2018).

Who supplies San Angelo, TX

Our data comes from public records and is still incomplete. Many utilities don't publish every number, so we're adding more all the time. Your city's range is a starting point: testing your own tap is the only way to know exactly what's in it.

Tap water lookup covers US cities only for now. Want to know why it matters? Read our story on tap water.

Compiled by Shoal & Stem from public records. Free to cite with a link.

Look up another city